DESCRIPTION

F Ball Styccobond F46 Pressure Sensitive Acrylic Adhesive

Styccobond F46 Adhesive is a solvent free pressure sensitive acrylic adhesive that dries to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a high bond strength. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.

Styccobond F46 Adhesive can be used for securing a wide range of PVC sheet and tile floor coverings.

See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

Styccobond F46 Adhesive has been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations

Styccobond F46 Adhesive can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard

Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

Styccobond F46 Adhesive can be applied directly to epoxy resin STOPGAP waterproof surface membranes and other non-absorbent subfloors where the surface finish is smooth enough to permit the installation of resilient floorcoverings.

Features

• True Pressure Sensitive Properties – ideal   for design floorcoverings
• Excellent Tack
• High Bond Strength
• Excellent Plasticiser Resistance
• Approved for marine use

Specification

• Coverage Rate (Approx.): 3m2 per litre with a STYCCOBOND A2 trowel, 4m2 per litre with a STYCCOBOND FINE NOTCH (A1), 5m2 per litre with 1.5mm x 5mm trowel
• Drying Time (Approx.): 40 minutes depending on temperature, humidity and absorbency of the subfloor

Coverage