AltroMastic 100 Flooring Sealant 290ml

DESCRIPTION

AltroMastic 100 Flooring Sealant 290ml

The AltroMastic 100 Flooring Sealant is available to colour match Altro Safety Flooring and Altro Transflor products. A standard sealant gun is required. 

Instructions for use

• AltroMastic 100 is a specially formulated sealing compound for use where Altro floorings abutt edges, skirtings, wall surfaces etc, or where the flooring is cut around pipes, upstands door frames etc.
• AltroMastic 100 is not recommended for use in trafficked areas, as a welded joint will give superior performance. Where flooring abutts drainage channels, access covers, quarry tiles etc, a clamping or welding system should be used. Please refer to Altro for detailing sheets.
• AltroMastic 100 should only be used to seal joints in Altro floorings where obstructions prevent the use of a hot air welding gun.

Specification

• Viscosity - Thixotropic.
• Density - 1.01.
• Cure Time - 24-48 hours.
• Skin Time - 20 minutes.
• Storage - Store between 5°C to 25°C in cool, dry conditions.
• Shelf Life - At least 12 months, in an airtight container, from date of manufacture.
• Coverage - Approximately 40 linear meters per 3mm bead.
• Working Temperature - Between 5°C to 40°C.
• Full Bond 4 days Contains - 290ml.

Procedure

• Surfaces to be sealed must be dry and free from dirt, oil or grease.
• All areas to be sealed should be masked with  masking tape.
• Place tube of sealant into skeleton gun.
• Cut off the end of the tube nipple, fix the nozzle, and apply a bead approximately 3mm in diameter.
• Once opened the curing process begins, therefore, open tubes may not be reused as the mastic may have cured within the tube.
• Remove masking tape as soon as possible as AltroMastic 100 is formulated to be fast curing.