Bostik
The Floormart Multi Purpose Adhesive Spray is a portable and lightweight multi adhesive spray that is easy to use and, with the quick bonding ability, is extremely useful. Free from Halogens, the Floormart Multi Purpose Adhesive Spray is very health and safety compliant and contains no chlorinated solvents.
For Packs of 12 please click here
The Floormart Multi Purpose Adhesive Spray is the latest advance in non-chlorinated adhesive technology for general purpose adhesives. It is designed to bond a wide variety of materials and utilizes our new valve system.
When using the Floormart Multi Purpose Adhesive Spray, the surface bonded to must be clean, dry and contaminant free. The use of halogen-free solvents means longer tack time so making repositioning possible for more accurate results. Spray in uniform coatings from 25cm (10 inches). On porous materials or for maximum strength adhesion, coat both surfaces, allow 3 – 5 minutes for the solvent to evaporate, then press firmly together from the centre. After use, invert can and spray to clear nozzle. Excess Sprayfix can be easily removed using our solvent cleaner. This adhesive is not suitable for heavily plasticised PVC.
An evaluation of the adhesive should be carried out in application conditions before commercial use is undertaken, this should also include reference to ageing.
Portable: | Lightweight 500ml Aerosol. |
Easy to Use: | Point and spray. |
Clean: | Ready to bond in less than 5 minutes. |
Health and safety: | It does not contain potentially environment or ozone damaging materials such as CFCs. It is Halogen-Free, contains no chlorinated solvents such as Methylene Chloride (Dichloromethane) or Trichloroethylene. It is also free of ozone damaging and hazardous air pollut materials (HAPS-Free) such as CFCs and Trichloroethan |
Floormart Multi Purpose Adhesive is now twinned with our new Easi-Flo valve and Easi-Control actuator system, which gives greater fingertip control; For larger areas, press actuator full on and move can away slightly. For narrower band widths or to apply less adhesive, press the actuator more gently and move can closer.
Use between 15 °C and 25 °C, higher/lower temperatures will affect setting times; at lower temperatures the solvents evaporate very slowly which greatly affects the setting time, at higher temperatures the adhesive will not set.
For lower temperatures see Contact Adhesive and Chlorinated Adhesives such as Supa-Stik and Heavy Duty.
For higher temperatures see Contact Adhesive and HAPS-Free Adhesive.
Whilst handling Sprayfix, we advise to avoid spillage, to keep away from heat, sparks and open flames and to use the adhesive in well ventilated areas. Sprayfix needs to be stored at moderate temperatures in dry, well ventilated areas and must not be exposed to direct sunlight or temperatures above 50°C.
Floormart Multi Purpose Adhesive Spray must be disposed of safely, in accordance with local authority requirements. The empty containers must not be burned due to explosion hazards.
bonds foams, felts, fabrics, cork, polythene and most other light and medium weight materials to themselves, each other or heavier substrates such as concrete, slate, brickwork, stone, ceramics, wood, metal, rigid plastics, rubber, glass and most other similar materials.
This Multi Purpose Adhesive Spray has many uses, which include:
Floor coverings – fixing carpets, carpet tiles, cork tiles, underfelts, etc.
Thermal insulation – polyurethane and fibrous insulation, foils, foam, cork, etc.
Asbestos removal – fixing polythene sheeting to concrete enclosures prior to removal.
Furniture manufacture – bonding foam to foam and upholstery fabrics.